Menu
Search
Search Close
Products
    Menu Close
    snapav-b-520-mtrx-230-6x4-2-lg.jpg

    BINARY - HDMI 6X4+2 MATRIX SWITCHER WITH SIMULTANEOUS HDMI AND HDBASET OUTPUTS WITH POC

    Manufacturer: Picture for manufacturer Binary Media Distribution
    BINARY - HDMI 6X4+2 MATRIX SWITCHER WITH SIMULTANEOUS HDMI AND HDBASET OUTPUTS WITH POC
    SKU: B-520-MTRX-230-6X4-2
    Availability:
    Richmond : 0
    Special Order
    Mississauga : 0
    Special Order
    Call for pricing

    BINARY - HDMI 6x4+2 MATRIX SWITCHER WITH SIMULTANEOUS HDMI AND HDBASET OUTPUTS WITH POC

    Shielded Cable Recommendation - Although HDBaseT transmission technology is much less susceptible to EMI interference than other transmission technologies, if possible, it is recommended that you pull shielded Cat5e/Cat6 with this product for maximum reliability. Please note: for proper shielding, shielded connectors must be used with drains connected at both ends. In addition, "EZ end"connectors are not recommended for use with HDMI extenders.
    Power Supply Voltage - Please use the 12V power supply included in the package. Use of power supply with a different voltage may cause damage to the product or the power supply.

    Our ultra-reliable Binary Matrix Switcher is now power-over-cable (POC) enabled, so the matrix powers the receiver. Of course it's still built on the same principles that put Binary on the map: custom install expertise, innovative technology, and ease-of-use. It even comes equipped with everything needed for control system integration: Ethernet, RS-232 control, and IR routing to boot. It uses a single Cat5e/6 cable to transmit HDMI signals and bidirectional IR - up to 230 ft. Plus, supplied rack ears make mounting easy.

    Simultaneous Outputs

    Each output provides an HDMI output for local display(s), as well as an HDBaseT output for longer distances. Just pair the HDBaseT output with the optional receiver to achieve distances up to 230 feet. Best of all, both of these outputs can be used in parallel.

    Integration Ready

    These switchers are now Control4 certified with SDDP built in for faster programming. To control the matrix itself, Ethernet, bi-directional RS-232 and IR are all available.

    POC Enabled

    This feature powers all the receivers from the matrix switchers. This means there is not need of power supplies on the Receiver side.

    HDMI with 3D

    Your covered with full support of the HDMI (with 3D), Deep Color (36bit) and HDCP 1.4 as well as support for Dolby True HD, Dolby Digital Plus, DTS-HD Master and LPCM audio formats.

    EDID Management

    EDID settings can be configured using the included remote control or convenient PC configuration utility. Three EDID modes are provided for ultimate flexibility - Auto, Embedded and Learning.

    2-Year Limited Warranty

    This Binary product has a 2-year limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty will not apply to products that have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).

    Features

    Simultaneous Outputs

    Each output provides an HDMI output for local display(s), as well as an HDBaseT output for longer distances. Just pair the HDBaseT output with the optional receiver to achieve distances up to 230 feet. Best of all, both of these outputs can be used in parallel.

    Integration Ready

    These switchers are now Control4 certified with SDDP built in for faster programming. To control the matrix itself, Ethernet, bi-directional RS-232 and IR are all available.

    POC Enabled

    This feature powers all the receivers from the matrix switchers. This means there is not need of power supplies on the Receiver side.

    HDMI with 3D

    Your covered with full support of the HDMI (with 3D), Deep Color (36bit) and HDCP 1.4 as well as support for Dolby True HD, Dolby Digital Plus, DTS-HD Master and LPCM audio formats.

    EDID Management

    EDID settings can be configured using the included remote control or convenient PC configuration utility. Three EDID modes are provided for ultimate flexibility - Auto, Embedded and Learning.

    Product Contents
    • (1) B-520-MTRX-230-6x4+2
    • (1) 12V DC, 7.5A Power supply
    • (1) Installation manual
    • (2) Rack ears
    • (4) Mounting screws
    • (1) CD ROM
    • (1) IR Remote
    2-Year Limited Warranty

    This Binary product has a 2-year limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty will not apply to products that have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).

    CERTIFICATIONS

    • CE Certified
    • FCC Certified

    Specifications

    B-520-MTRX-230-6x4+2
    Sub Brand Binary
    Series 520
    HDMI over UTP Transmission Full HD 1080p 36-Bit Deep Color: 200 ft (Cat5e/Cat6), 230 ft (Cat6a) Full HD 1080p 24-Bit Color: 200 ft (Cat5e/Cat6), 230 ft (Cat6a) 1080i/720p 24-Bit Color: 200 ft (Cat5e/Cat6), 230 ft (Cat6a)
    HDMI Compliance HDMI 3D
    HDCP Compliance Yes
    Supported Video Bandwidth 6.75 Gbps
    Input TMDS Signal 1.2 V (Peak-to-Peak)
    Input DDC Signal 5 V (Peak-to-Peak, TTL)
    ESD Protection (1) Human Body Model: +/- 12 kV (Air-Gap Discharge) and +/- 8 kV (Contact Discharge) (2) Core Chipset +/- 8 kV
    IR Frequency 20 - 60 Khz Carrier
    HDMI Port 12 x HDMI Type A
    IR Input 4 mm x 3.5 mm Mono
    IR Output 6 mm x 3.5 mm Mono
    RS232 Control Port DB9
    Ethernet 1 x RJ45
    DipSwitch 1 Control RS-232
    Line Voltage 12 VDC, 16 A
    Power Consumption 50 W
    Temperature Rating 32 - 104 deg F
    Relative Humidity 20 - 90% (Non-Condensing)
    Dimensions 17.32 Inch W x 12.59 Inch D x 3.46 Inch H (Without Ears)
    Includes (1) B-520-MTRX-230-6x4+2, (2) Rack Ears For Mounting, (4) Screws, (1) IR Remote Control, (1) Power Supply 12 VDC, 16A, (1) Installation Manual, (1) CD-ROM
    Weight 11.56 lb
    HDBaseT Connections 4 x RJ45
    Rack Spacing 2U
    Storage Temperature -4 to 140 deg F
    Inputs/Outputs 6x4+2

    Support

    Manuals and Guides

    Supporting Documents

    Technical Drawings

    Software and Firmware
    Control Protocols and Drivers
    *
    *
    *
    Products specifications
    Technology HDBaseT
    Input Outputs 6 x 4
    Resolution 1080p
    Type Matrix
    Product tags
    • (6409)
    Flexible Payment Solutions

    Flexible Payment Solutions

    Take advantage of our PARTNERPAY flexible payment plans to help with managing payments for large orders, or to bridge the gap between buying product and getting paid from your customers.

    View Details
    RMA Request Form

    RMA Request Form

    Simply complete the form and we will process your request or contact you if further information is needed.

    View Form
    Staub Shipping Desk

    Staub Shipping Desk

    Tired of paying the posted rates on everything you ship? Tap into our discounts with major shipping carriers to save you money.

    View Details
    Information
    My Account
    Customer service

    Payment options

    Copyright © 2025 Staub Electronics. All rights reserved.
    We bring together the best people, partners, and products to make lives more enjoyable, connected, and secure.
    Resources
    My Account
    Customer Service
    Stay Connected
    Copyright © 2022 Staub Electronics. All rights reserved.   |   Privacy Policy   |   Terms & Conditions