Personal menu

LUTRON - RADIORA2 1000W DIMMER (LIGHT ALMOND)

Manufacturer:

SKU: RRD-10D-LA

Availability:

Richmond : 0

Special Order

Mississauga : 0

Special Order

Call for pricing

Overview
Features
Specifications
Support
Contact Us

RADIORA 2 MAESTRO® LOCAL CONTROLS

RadioRA 2 Maestro local controls function much like standard dimmers and switches, but can be controlled as part of a lighting control system. Local lighting controls are useful in locations where single circuits of lighting need to be dimmed or switched.

RadioRA 2 Maestro dimmers incorporate advanced features such as fade on / fade off, delayed long fade to off, and rapid full on.

RadioRA 2 Maestro local controls include a Front Accessible Service Switch (FASSTM) for safe lamp replacement. RadioRA 2 Maestro local controls install in single-pole or multi-location applications. Remote dimmers / switches are available for multi-location control.

Use Lutron® Designer (Claro® or Satin Colors®) wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately. Lutron Claro and Satin Colors wallplates snap on with no visible means of attachment. RadioRA 2 Maestro local controls support color change kits.

FEATURES

Design Features

On a single-tap, lights fade ON or OFF.
On a double-tap, lights go to full ON.
When ON, press and hold the tapswitch to engage the delayed long fade to OFF.
Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached.
Neutral and two-wire dimmers available.

SPECIFICATIONS

Main Specifications

1000 W / 1000 VA Dimme
Incandescent / Halogen / MLV (120 V )

Model Number	RRD-10D-LA
Power	120 V 50 / 60 Hz (-6D, -10D, -10ND, -6NA, -8ANS, -RD, -RS) 120 - 277 V 50 / 60 Hz (-F6AN-DV, -8S-DV) 277 V 50 / 60 Hz (-RD-277, -RS-277)
Typical Power Consumption	Dimmer / Switch: 0.2 W Test conditions: load is off and nightlight mode is enabled. Remote Dimmer / Switch: 0 W Test conditions: load is off.
Regulatory Approvals	UL, CSA, NOM, FCC, IC, COFETEL
Environment	Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing. Indoor use only.
Communications	Dimmers and switches communicate with the system through Radio Frequency (RF) and must be located within 30 ft (9 m) of a repeater. Remote dimmers / switches are not required to be within a specific range of a repeater. System devices operate on frequencies between 431.0 MHz and 437.0 MHz.
ESD Protection	Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
Surge Protection	Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.
Power Failure	Power failure memory: should power be interrupted, the control will return to its previous state when power is restored.
Mounting	Requires a U.S. wallbox. 3 ½ in (89 mm) deep recommended, 2 ¼ in (57 mm) deep minimum.
Wiring	Uses conventional 3-way and 4-way wiring.