WATTBOX - POWERFLEX SQUARE KIT W/DUPLEX 110V WALL PLATE AND SILICONE A/V PASS THROUGH (BLACK)

 Download the Operations Manual

 Download the Specifications

Wattbox® PowerFlexT Square Kit with Duplex 110V Wall Plate and Silicon A/V Pass Through (Black)

PowerFlexT Is An Installation Space & Time Saver: We designed the PowerFlexT to reduce installation time and save wall space. Why? Because you asked us! How about one product that saves space by combining wall mountable recessed power outlets with wall mountable bulk wire management? What did we do? We combined our popular PowerLink2T and Flexnose to make the PowerFlexT. This solves practical installation issues such as hiding power cables and audio/video pass through cables in a clean, easy to install, and professional form factor.

• Ceiling? No problem
• Behind a wall mount TV? No Problem
• Behind an Entertainment Center? No Problem
• Behind an Equipment Rack? No Problem
• Behind furniture? No Problem

Plus, it allows equipment (i.e. televisions and baluns) to be protected by the same surge and power device that is protecting the AV equipment. No need for expensive in-wall surge protection equipment. And the dual outlet gives flexibility to power additional equipment such as baluns, DVD players, etc.

Hiding Power cords and AV cables for an In-Wall TV Installation is a Snap!: We've timed ourselves, and in about 25 minutes you can provide power and cables from your AV equipment to the television... and not have unsightly cables running down a wall to the nearest power outlet. Simply install power inlet box near your AV equipment, and the dual outlet box behind your television, run your AV cables and electrical cable to connect the two boxes, and you're done.

ETL Listed: This listing conforms to UL STD 514C, certified to CAN/CSA STD C22.2 No. 42.1

Shares a Common Ground with External Surge Protection: Just plug the included power cord into your surge protector and connect to the PowerFlex inlet. By running all audio and video equipment through a common surge protector, you'll avoid complications caused by ground loops.

Recessed Inlet Receptacle and Duplex Outlet Receptacle: For clean, low-profile installations such as wall mounting televisions.

Includes:

• (2) Work Boxes
• (1) Recessed Male Inlet faceplate with screws
• (1) Duplex Outlet faceplate with screws
• (2) Square faceplates with Flexnose and screws
• (4) Sheet rock anchors
• (1) 36" 3-Prog Power Cord
• (6) Wire Nuts

Two Outlets Instead of One!: Many installers use Cat5/6 in the walls to run component, composite, and HDMI signals from the equipment to the television. We included dual outlets to take advantage of installers needs for today's, and tomorrow's, future applications.

Tools & Materials Needed:

• ROMEX® or equivalent non-metallic type building electrical wire.
• Stud Finder
• Tape Measure
• Pencil
• Level
• Drywall Saw/Sharp Utility Knife
• Phillips and flat head screwdriver
• Wire Stripper
• Electrical Outlet Tester

ROMEX® is a registered trademark of the Southwire Company.

**(Also needed: 3-Conductor ROMEX® Electrical Wire- NOT SUPPLIED)

Note: THIS PRODUCT IS NOT TO BE HARD-WIRED DIRECTLY TO AN ELECTRICAL CIRCUIT. IT IS DESIGNED AS AN ELECTRICAL PLUG-IN DEVICE TO USED WITH AN EXISTING A/C GROUNDED OUTLET ONLY. THIS PRODUCT IS RATED FOR USE WITH A