Menu
Search
Search Close
Products
    Menu Close
    Picture of BINARY - 4K ULTRA HD MEDIA OVER IP TRANSMITTER

    BINARY - 4K ULTRA HD MEDIA OVER IP TRANSMITTER

    Manufacturer: Picture for manufacturer Binary Media Distribution
    BINARY - 4K ULTRA HD MEDIA OVER IP TRANSMITTER
    SKU: B-900-MOIP-4K-TX
    Availability:
    Richmond : 0
    Mississauga : 0
    Call for pricing

    BINARY 900 Series 4K Media over IP Transmitter - 8.91 GBPS

    Binary 900 Series 4K Media over IP Transmitters, when joined in a system with a MoIP Receiver ( B-900-MOIP-4K-RX or B-900-MOIP-4K-RX-RAC) and one MoIP Controller B-900-MOIP-4K-CTRL create a highly scalable, flexible IP media distribution system delivering visually lossless 4K HDR (HDR 30Hz and HDCP 2.2 compatible) video. Operating on a cost-effective gigabit Layer 2 PoE switch, this setup is the fastest and simplest out there. Additionally, OvrC remote management allows for quick system setup, easy troubleshooting with access to live screenshots of source streams and fast, simple firmware updates. MoIP Transmitters also include a selection of audio features that allow dealers to solve issues on every job, including HDMI loop-out, audio injection, audio breakout and the ability to fix the audio to stereo or 5.1 multichannel. Lastly, RS-232, IR, and custom drivers for popular control systems provide tremendous flexibility in system design.

    4K HDR
    PoE
    HDCP 2.2
    Audio Embed
    HDMI Loopout
    Audio Breakout

    Visually Lossless 4K Video

    MoIP encodes video up to 4K HDR using visually-lossless, variable bit-rate compression technology. The system is HDR and HDCP 2.2 compatible, resulting in an ultra-stable video stream, perfect audio/video sync and ultra-low latency (one frame).

    Versatile Audio

    Each MoIP transmitter features versatile options for distributing audio. Multichannel audio including Dolby Atmos and DTS:X can be sent to an AV Receiver with the HDMI loop-out. For 2-ch PCM sources, stereo analog can be extracted for routing to multi-room distribution amplifiers, or injected to replace the HDMI audio. Lastly, the source can be forced to output stereo or multichannel to reduce potential complications after you leave the job.

    Limitless Control Options

    Switching of inputs (TX) to outputs (RX) is done through IP commands from a control system sent to the MoIP controller. Out of the box, the system supports three methods for controlling sources and displays: IR, RS-232 and CEC. IR or RS-232 commands can be issued via IP and generated at each endpoint. If desired, IR and RS-232 virtual routing can also be configured from any TX to any or all RX(s). Desired methods for issuing commands are selectable via the local UI. Lastly, for more basic installs where display on and standby is all that is needed, MoIP also supports CEC.

    Real-Time Video Diagnostics

    MoIP provides peace of mind when you leave the job. Not only is it inherently reliable, but there are a host of tools to assist in troubleshooting. Each transmitter provides a live screenshot of the source output, so you can quickly determine if the source is generating video. Additionally, deeper insights are readily available - such as resolution, refresh rate, color depth and HDCP version detected. Best of all, thanks to OvrC, all of this is easily accessed remotely so you can resolve issues caused by unpredictable sources - or customers - without rolling a truck.

    Control System Integration

    Our engineers have written drivers for the industry's leading control systems, including Control4, Crestron, ELAN, URC and more - so controlling the system has a familiar feel. Advanced features like IR routing and RS-232 over IP deliver even more flexibility and customization - and we've even provided the MoIP controller's API to create your own drivers if needed

    Perfect for Commercial Applications

    From small offices to large-scale bars and restaurants, Binary MoIP allows you to distribute multiple sources to any number of screens, or even create stunning video walls. Binary is also compatible with applications like DTVGameControl, which help your clients control and manage their devices.

    The Binary MoIP Difference

    The Fastest, Simplest Solution

    Gone are the days of head-scratching system design, next-level network know-how and confusing configurations. Binary MoIP removes all that complexity, requiring only a Layer 2 PoE switch (210 and 310 Series), so you don't need a network guru to install it. OvrC-enablement, simple setup and intuitive user-interfaces enable you to go from power-on to picture in 5 minutes or less.

    Flexible and Scalable

    The Binary MoIP solution allows you to fit, scale, and upgrade the solution to match your client's specific needs. Need a 6x8 for one job and a 7x13 for another one? No problem. What about adding a video wall? Done. Instead of replacing the entire system, you can simply purchase new transmitters or receivers when adding sources or displays.

    Ultra-Reliable HDR

    With Binary MoIP, legacy EMI interference and HDCP/EDID issues are eliminated. Each source is encoded, visually lossless, at the highest quality possible (ex. 4K HDR). Then at each display, the signal is decoded from the network and scaled to the desired resolution (ex. 1080p or 4K HDR). Built-in scaling in the RX means that mixed 1080p/4K systems are no longer a problem, plus pass-through of all audio formats like Dolby Atmos and DTS:X are fully supported.

    The Power of OvrC

    Binary MoIP delivers something no other media product can - award-winning remote management. OvrC quickens initial setup by auto-discovering the controller, plus it provides unparalleled troubleshooting tools like real-time video screenshots

    Standalone App

    Thanks to our standalone app that's embedded into the controller firmware, your client's MoIP system can be operated outside a traditional control system. Follow easy installation steps to give users access to switching of sources, displays, turn off displays, and save scenes (ex: "Game Night") for easy recall.

    2-Year Limited Warranty

    This Binary product has a 2-year limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty will not apply to products that have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).

    Features

    Visually Lossless 4K Video

    MoIP encodes video up to 4K HDR using visually-lossless, variable bit-rate compression technology. The system is HDR and HDCP 2.2 compatible, resulting in an ultra-stable video stream, perfect audio/video sync and ultra-low latency (one frame).

    Versatile Audio

    Each MoIP transmitter features versatile options for distributing audio. Multichannel audio including Dolby Atmos and DTS:X can be sent to an AV Receiver with the HDMI loop-out. For 2-ch PCM sources, stereo analog can be extracted for routing to multi-room distribution amplifiers, or injected to replace the HDMI audio. Lastly, the source can be forced to output stereo or multichannel to reduce potential complications after you leave the job.

    Limitless Control Options

    Switching of inputs (TX) to outputs (RX) is done through IP commands from a control system sent to the MoIP controller. Out of the box, the system supports three methods for controlling sources and displays: IR, RS-232 and CEC. IR or RS-232 commands can be issued via IP and generated at each endpoint. If desired, IR and RS-232 virtual routing can also be configured from any TX to any or all RX(s). Desired methods for issuing commands are selectable via the local UI. Lastly, for more basic installs where display on and standby is all that is needed, MoIP also supports CEC.

    Real-Time Video Diagnostics

    MoIP provides peace of mind when you leave the job. Not only is it inherently reliable, but there are a host of tools to assist in troubleshooting. Each transmitter provides a live screenshot of the source output, so you can quickly determine if the source is generating video. Additionally, deeper insights are readily available - such as resolution, refresh rate, color depth and HDCP version detected. Best of all, thanks to OvrC, all of this is easily accessed remotely so you can resolve issues caused by unpredictable sources - or customers - without rolling a truck.

    Control System Integration

    Our engineers have written drivers for the industry's leading control systems, including Control4, Crestron, ELAN, URC and more - so controlling the system has a familiar feel. Advanced features like IR routing and RS-232 over IP deliver even more flexibility and customization - and we've even provided the MoIP controller's API to create your own drivers if needed

    Perfect for Commercial Applications

    From small offices to large-scale bars and restaurants, Binary MoIP allows you to distribute multiple sources to any number of screens, or even create stunning video walls. Binary is also compatible with applications like DTVGameControl, which help your clients control and manage their devices.

    The Binary MoIP Difference

    The Fastest, Simplest Solution

    Gone are the days of head-scratching system design, next-level network know-how and confusing configurations. Binary MoIP removes all that complexity, requiring only a Layer 2 PoE switch (210 and 310 Series), so you don't need a network guru to install it. OvrC-enablement, simple setup and intuitive user-interfaces enable you to go from power-on to picture in 5 minutes or less.

    Flexible and Scalable

    The Binary MoIP solution allows you to fit, scale, and upgrade the solution to match your client's specific needs. Need a 6x8 for one job and a 7x13 for another one? No problem. What about adding a video wall? Done. Instead of replacing the entire system, you can simply purchase new transmitters or receivers when adding sources or displays.

    Ultra-Reliable HDR

    With Binary MoIP, legacy EMI interference and HDCP/EDID issues are eliminated. Each source is encoded, visually lossless, at the highest quality possible (ex. 4K HDR). Then at each display, the signal is decoded from the network and scaled to the desired resolution (ex. 1080p or 4K HDR). Built-in sc

    Specifications

    B-900-MOIP-4K-TX
    Sub Brand Binary
    Series 900
    Type 4K UHD
    Video Resolution Transmitter: Upto 4K UHD at 60 hz 4:2:0, 4K HDR at 30 hz, 4K UHD at 30 hz 4:4:4 8-Bit Plus Full 1080p HD and Lower Resolution Including Interlaced Video Formats, Receiver: Upto 4K UHD at 30 hz 4:4:4 8-Bit HDR Content when Available 4K HDR at 30 hz 8-Bit Integrated Scaler to Support 4K, HDCP 2.2 on 1080p, HDCP 1.4 Displays
    Integrated Video Scaler Yes (4K, 1080p)
    HDR Support HDR 20/24 hz
    Video Wall Support 2 x 2, 3 x 3, 4 x 4
    Color Space RGB, YCbCr
    Chroma Subsampling 4:4:4, 4:2:2, 4:2:0
    Bandwidth 8.91 Gbps Maximum
    Pixel Clock 297 Mhz
    Color Depth 8-Bit, 10-Bit, 12-Bit
    HDCP Compliance HDCP 2.2
    HDMI Compliance HDMI 2.0b
    HDMI Connections 19-Pin Type-A Female In/Out
    Audio Format PCM 2-Channel, LPCM 2.0, LPCM 5.1, LPCM 7.1, Dolby Digital, Dolby True HD, Dolby Digital Plus, Dolby Atmos , DTS , DTS -HD Master Audio and DTS NeoX
    Audio Sample Rate 32 khz, 44.1 khz, 48 khz, 88.2 khz, 96 khz, 176.4 khz, 192 khz
    Audio Bit Depth 24-Bit
    Audio Input/Output Mini Stereo 3.5 mm Jack Audio In, L/R RCA Audio Out, Analog Audio In and Out
    Control Type TX/RX Switching MoIP Controller, 2-Way IR Routing
    IR Signal Frequency 20 - 60 khz
    IR Input/Output (1) 3.5 mm Stereo (Blue) 12 V Input, (1) 3.5 mm Stereo (Green) Output
    DIP Switch Controls IR RCVR PWR OFF/ON, Serial/RS-232 DTE/DCE
    Ethernet Pass Through 10/100Mbps 10/100/1000 Mbps
    Port Type Ethernet: RJ-45 (T568B) LAN + PoE, RS-232: RJ-45 (EIA-561)
    Cable Category Cat 5e/6/6a/7
    Distance From Switch 100 m Maximum
    Port Throughput 1 Gbps
    Required Managed Switch Layer-2 Managed with IMGP Snooping
    IP Address Assigned by Controller
    System Configuration Supports Single Switch Deployments and Multiple Switch Deployments, On-Screen Device Identification, Auto Device Discover
    Bit Rate 150 - 300 Mbps (Average), 850 Mbps (Maximum)
    Latency 1 Frame (16 msec - 60 hz, 33 msec - 30 hz)
    PoE Cons
    *
    *
    *
    Products specifications
    OvrC Enabled Yes
    Resolution UHD
    Technology AV over IP
    Type Transmitter
    Product tags
    • (6409)
    Flexible Payment Solutions

    Flexible Payment Solutions

    Take advantage of our PARTNERPAY flexible payment plans to help with managing payments for large orders, or to bridge the gap between buying product and getting paid from your customers.

    View Details
    RMA Request Form

    RMA Request Form

    Simply complete the form and we will process your request or contact you if further information is needed.

    View Form
    Staub Shipping Desk

    Staub Shipping Desk

    Tired of paying the posted rates on everything you ship? Tap into our discounts with major shipping carriers to save you money.

    View Details
    Information
    My Account
    Customer service

    Payment options

    Copyright © 2025 Staub Electronics. All rights reserved.
    We bring together the best people, partners, and products to make lives more enjoyable, connected, and secure.
    Resources
    My Account
    Customer Service
    Stay Connected
    Copyright © 2022 Staub Electronics. All rights reserved.   |   Privacy Policy   |   Terms & Conditions